Mechanical buckling of two-dimensional functionally graded cylindrical shells surrounded by Winkler–Pasternak elastic foundation

In this research, buckling analysis of a two-dimensional, functionally graded, cylindrical shell that has been embedded in an outer elastic medium in the presence of combined axial and transverse loading based on third-order shear deformation shell theory is numerically investigated. Variations of the shell properties are considered to be continuous through length and thickness. Winkler–Pasternak foundation and simply supported boundary conditions have been applied. The problem has been solved using the generalized differential quadrature method. Geometrical, load, and foundation parameters beside functionally graded power indexes effects on the critical buckling load have been studied.     

Investigations of electrically driven liquid metal flows using an ultrasound Doppler flow mapping system

This paper presents a combined experimental and numerical study of the properties of a liquid metal flow inside a cylinder driven by the application of a strong electrical current. The interaction between the electric current running through the melt and the corresponding induced magnetic field produces so-called electro-vortex flows. We consider here a configuration of two parallel pencil electrodes immersed at the free surface. Velocity measurements were performed by means of the Ultrasound Doppler method. A linear array of 25 singular transducers was used to determine the two-dimensional pattern of the vertical flow component. Numerical simulations of the magnetohydrodynamic (MHD) problem were conducted to calculate the Lorentz force, the Joule heating and the induced melt flow. Experimental and numerical results reveal a complex three-dimensional flow structure of the liquid metal flow. In particular, two pronounced downward jets are formed below both electrodes. The flow structure appears to be symmetrical with respect to two vertical cross sections being perpendicular to each other and one of the two planes contains the electrodes. The comparison between the experimental data and the numerical results shows a very good agreement.     

Viscous Potential Flow Analysis of Kelvin–Helmholtz Instability of a Cylindrical Flow with Heat and Mass Transfer

A linear analysis of Kelvin–Helmholtz instability of a cylindrical interface has been carried out when there is heat and mass transfer across the interface, using viscous potential flow theory. Both fluids are considered as incompressible, viscous, and thermally conducting with different kinematic viscosities. Both axisymmetric as well as asymmetric disturbances are considered. Stability criterion is given by a critical value of relative velocity and stability is discussed theoretically as well as numerically. Various graphs with respect to physical parameters such as wave number, viscosity ratio, heat transfer coefficients, Reynolds number, etc., have been drawn and the effect of various parameters have been described. A comparison with the linear stability analysis of inviscid fluids (Lee [10]) has been made and it is observed that viscosity has a stabilizing effect on the stability of the system. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res, 43(6): 489–503, 2014; Published online 3 October 2013 in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21092     

Crushing analysis and multi-objective optimization of different length bi-thin walled cylindrical structures under axial impact loading

This article attempts to increase the crashworthiness characteristics of energy absorbers. It is found that the effect of the bi-tubular arrangement on the energy absorption and peak force is nonlinear. This nonlinearity is somewhat related to friction but is mostly related to the changing of buckling modes. Therefore, it is possible to reach higher Specific Absorbed Energy (SAE) in the bi-tubular case than with two tubes since the weight is the same in both arrangements while the energy absorption is higher in the bi-tubular case. To exploit this, multi-objective optimization of bi-thin walled cylindrical aluminium tubes under axial impact loading is performed. The absorbed energy and the SAE are considered as the objective functions while the maximum crush load is regarded as a constraint. Finally, the optimal dimensions of tubes are found in order to maximize the SAE and energy absorption for a specified maximum crushing force.     

Accurate Volume Measurement System for Plutonium Nitrate Solution

Abstract

An accurate volume measurement system for a large amount of plutonium nitrate solution stored in a reprocessing or a conversion plant has been developed at the Plutonium Conversion Development Facility (PCDF) in the Power Reactor and Nuclear Fuel Development Corp. (PNC) Tokai Works. A pair of differential digital quartz pressure transducers is utilized in the volume measurement system. To obtain high accuracy, it is important that the non-linearity of the transducer is minimized within the measurement range, the zero point is stabilized, and the damping property of the pneumatic line is designed to minimize pressure oscillation. The accuracy of the pressure measurement can always be within 2 Pa with re-calibration once a year. In the PCDF, the overall uncertainty of the volume measurement has been evaluated to be within 0.2%. This system has been successfully applied to the Japanese government's and IAEA's routine inspection since 1984.     

Global optimization of laminated cylindrical panels based on fundamental natural frequency

This investigation presents an optimization of laminated cylindrical panels based on fundamental natural frequency. Also, trends of change in optimum stacking sequence while the proportions of structures vary, are studied which can be insightful for design purposes. A displacement based finite element model is used, in order to extract fundamental natural frequencies of T300/5208 Carbon/Epoxy cylindrical panels. To obtain optimum designs, the Globalized Bounded Nelder–Mead (GBNM) algorithm is employed. Predictions are compared with the results of Genetic Algorithm (GA) method and show faster and more accurate convergence to the global optimum, while variables are continuous in GBNM and discrete in GA. Moreover, verification of novel convergence criteria to ameliorate local searcher in GBNM is examined.     

TLM modeling of a probe‐coupled cylindrical cavity based on compact wire model in the cylindrical mesh

This article describes an implementation of a compact wire model into the three‐dimensional transmission‐line matrix (TLM) cylindrical mesh for the purpose of an efficient analysis of probe‐coupled cylindrical microwave cavity devices. Because of a cylindrical grid structure and empirical nature of the compact model, this implementation has to take into account a change of wire model parameters with a variable cross section of the TLM nodes through which a wire conductor passes. The model accuracy has been experimentally verified and compared with the corresponding results reached by the TLM method based on a rectangular grid in order to consider its advantages. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

高速磨床动态性能及变速磨削颤振的实验研究

为提高高速磨削表面质量,系统研究高速外圆磨床动力特性。通过设计动态性能试验,找到了样机的振动薄弱环节和主要振源,提出相应的改进措施。在改进后的高速外圆磨床上进行变速磨削颤振试验,结果证明变速磨削能在一定程度上抑制高速磨削颤振。     

环肋圆柱壳结构焊接残余应力和变形的数值模拟

运用有限元软件ANSYS的APDL语言,对耐压圆柱壳结构的焊接残余应力和变形编制计算程序,运用生死单元技术,对结构进行焊接热应力分析,得到环肋圆柱壳结构的焊接残余应力分布和焊接残余变形.计算结果表明,轴向焊接残余应力在结构肋骨附近呈双峰形态,以及残余变形在焊缝处(肋骨所在位置)最为剧烈,焊接轴向残余应力总体上来说比较小...     

窄搭接焊机的搭接量控制原理及故障分析

介绍了攀钢集团攀枝花钢钒有限公司冷轧厂2#热镀锌生产线焊机搭接量控制伺服系统的原理及特点,其搭接量可在0～6mm范围内连续可调,通过该项技术的应用,避免了焊接过程中因搭接量的变化而造成传动侧焊缝开裂、焊不上等焊接缺陷,保证了产品质量,有效提高了产品的成品率,减少了断带次数.